•  Trelleborg pulsor hoses WP 100 Bar.

Concrete Delivery Pipe

Innovation is our forte and manufacturing along with supplying of Concrete Delivery Pipes from our side is a strong example of the same. These concrete delivery pipes are made of highly wear resistant material and are seamless in construction. The special flanged collared joints at the ends have stood the test on the sites.

Features:

• Super high pressure
• Thick walled
• Easily connectible

Certain features of these pipelines are given below:

• Normal pipes with a wall thickness of upto 4.5 mm. are suitable for pumping pressures of up to PN145.
• Thick walled pipes with a wall thickness of 7.1 mm. are suitable for concrete pumps of pumping pressures upward of 145PN.
• Super high pressure pipes with wall thickness of 7.1 to 10 mm., depending upon the pipeline diameter are suitable for PN200.

Pipe Bends:

• For changes of pipeline directions bends are offered in 120 deg., 90 deg., 60 deg., 45 deg., 30 deg. or 15 deg
• Normally the bends have a radius of 1 metre, though they can be longer or shorter as per the needs.
• These also have special male and female flanges on ends

Transition Pipes:

• These are short pipes of length 0.5 to 1.5 metres for connecting high pressure delivery pipes
• These pipes have normal male flanges on both sides

Pipe Couplings:

• The super high pressure pipes are exclusively connected by means of cup type tension coupplings
• These couplings are used to clamp the joints of male and female flanges. These come in lever type or wedge type designs

Sealing Rings:

• These rings are special grade rubber rings used to seal the joint of male and female flanges

 Manufacturer & Supplier of Concrete Delivery Pipes. Our product range also comprises of Rubber Hoses, Concrete Pump Parts and Water Stop Seals.